Der ADSL-Router Prestige 642R kann als ADSL-Bridge konfiguriert werden. Die wichtigen Menüs sehen dann wie folgt aus.
| Menu 1 - General Setup | |
| System Name=P642 | |
| Location= | |
| Contact Person's Name= | |
| Route IP=No | |
| Router IPX=No | |
| Bridge=Yes | |
| Menu 4 - Internet Access Setup | |
| ISP's Name= ChangeMe | |
| Encapsulation= RFC 1483 | |
| Multiplexing= LLC-based | |
| VPI#= 8 | |
| VCI#= 35 | |
| Service Name= N/A | |
| My Login= N/A | |
| My Password= N/A | |
| Single User Account= No | |
| IP-Adress Assignement= N/A | |
| IP Address= N/A | |
| ENET ENCAP Gateway= N/A | |
| Menu 11.1 - Remote Node Profile | |||
| Rem Node Name= ChangeMe | Route= None | ||
| Active= Yes | Bridge= Yes | ||
| Encapsulation=RFC 1483 | Edit PPP Options= N/A | ||
| Multiplexing=LLC-based | Rem IP Addr= N/A | ||
| Incoming: | Edit IP/IPX/Bridge= No | ||
| Rem Login= N/A | |||
| Rem Password= N/A | |||
| Outgoing: | Sessions Options: | ||
| My Login= N/A | Edit Filter Sets= No | ||
| My Password= N/A | PPPoE Idle Timeout(sec)= N/A | ||
| Authen= N/A | PPPoE Service Name= N/A | ||
| Schedule Sets= N/A | |||